Help required - stuck in a reboot loop
Posted: Thu Oct 05, 2017 2:40 pm
Hi folks,
Backstory: I'd been having issues with port forwarding (for TivoWeb) on my stupid plusnet router, and needed to re-assure myself that my Tivo was definitely set to DHCP as apparently, setting a leased IP on the router, as well as having a static IP on the Tivo can mess with port forwarding.
Anyways, rather than checking whether I had static IP on the Tivo or not, I just followed the instructions here, to set DHCP:
http://www.altepg.com/networkConfiguration/
All went well, and I did the reboot.
Unfortunately, that seems to be all that the machine is capable of. It gets as far as the "indiana jones" sequence, then seconds later (at slightly different points each time), it will just reboot.
Because AltEpg has been so amazing, my knowledge of bash (Etc) has slipped away but i'm happy to re-learn. Can someone give me pointers of what I should check? I have access to a few things that will help me troubleshoot, but wondered if someone could tell me where to focus my efforts. At my parents house I have the following:
- 2 or 3 spare Tivos
- Old PC that I can connect the drive to (and AltEPG Iso if it's worth trying to config the network card via. the install CD)
Ideas I have are:
- to swap the drives into another machine (to see if its a hardware issue with mine)
- to chase the network problem and try and resolve it
- to trawl through log files
Not sure where to start - opinions welcome. The fact all my kit is at my parents house makes this very awkward to try and resolve without many (long distance) trips, or lots of time spent there trying to fight it through.
Backstory: I'd been having issues with port forwarding (for TivoWeb) on my stupid plusnet router, and needed to re-assure myself that my Tivo was definitely set to DHCP as apparently, setting a leased IP on the router, as well as having a static IP on the Tivo can mess with port forwarding.
Anyways, rather than checking whether I had static IP on the Tivo or not, I just followed the instructions here, to set DHCP:
http://www.altepg.com/networkConfiguration/
All went well, and I did the reboot.
Unfortunately, that seems to be all that the machine is capable of. It gets as far as the "indiana jones" sequence, then seconds later (at slightly different points each time), it will just reboot.
Because AltEpg has been so amazing, my knowledge of bash (Etc) has slipped away but i'm happy to re-learn. Can someone give me pointers of what I should check? I have access to a few things that will help me troubleshoot, but wondered if someone could tell me where to focus my efforts. At my parents house I have the following:
- 2 or 3 spare Tivos
- Old PC that I can connect the drive to (and AltEPG Iso if it's worth trying to config the network card via. the install CD)
Ideas I have are:
- to swap the drives into another machine (to see if its a hardware issue with mine)
- to chase the network problem and try and resolve it
- to trawl through log files
Not sure where to start - opinions welcome. The fact all my kit is at my parents house makes this very awkward to try and resolve without many (long distance) trips, or lots of time spent there trying to fight it through.